Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Display Modes
 
Old 10-29-2006, 05:44 PM   #1
Platinum Member
 
markopolo's Avatar
 
Join Date: Oct 2006
Location: New Brunswick, Canada
Posts: 8,828
Default House Batteries

I replaced the single group 27 Exide Dual Purpose
575 CCA, 700 MCA, 160 RC (min.), 95 Amp Hr.
battery that came with my 2004 Roadtrek 190P with:

two Kirkland (Costco) group 27 Dual Purpose
675 CCA, 845 MCA, 180 RC (min.), 115 Amp Hr. batteries.

I like the RC 180 and 115 Amp Hr. ratings. The $85 Canadian price (each) was right too!

They fit great and I now have at least 1/2" clearance on top. The Exide with a trimmed terminal was a tight fit.

Here are more detailed specifications on the Kirkland (Costco) model # 27DC675 battery.

Group 27M
CCA: 675
CA: 850
RC: 180 minutes @ 25 amps

Discharge Rate____Hours____Amp-hrs
1.0_______________115______115
5.0_______________18.7_____93
10.0______________8.5______85
15.0______________5.4______81
20.0______________3.9______77

25.0=====> 180 minutes

I received this information in an email from Johnson Controls, the manufacturer of the Costco batteries I purchased.
markopolo is offline   Reply With Quote
Old 01-03-2007, 03:25 PM   #2
Platinum Member
 
markopolo's Avatar
 
Join Date: Oct 2006
Location: New Brunswick, Canada
Posts: 8,828
Default

On the 2004 Roadtrek 190P, the house battery is in a small compartment on the passenger side behind the rear wheel. It is only big enough for one battery. The battery is on a slide out tray.

I put the second battery in the small compartment on the passenger side in front of the rear wheel. I did not use a slide out tray.

Home & Park sells a complete kit for this. It has a second tray that would install in the compartment in front of the passenger side rear wheel well, two cables ( Positive and Negative) with battery ends, vents for the compartment modification, wire protectors for the entry in the compartment, bolts, nuts and washers and battery hold down.

I didn't purchase the kit. I 'saved' $300 but, if I had to do it again, I'd probably buy the kit. If I had done the entire job myself I would have saved $500.

I paid a company to make and install the cables which took them 2 hours. It took me another two hours to fix what they did. The cables were getting kinked each time the slide out tray was pushed back in.

The two batteries are connected in parallel. I have 100amp fuses on each end of the positive cable that connects the two batteries. No fuse on the negative cable.
markopolo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.