Travato Salenoid location

[Zia]

Having charging problems, but can't locate the Solenoid location in my unit

[thefitrv]

In a metal box by the rear axle.

[riplips]

w.winnebagoind.com/diagram/2015/15_259g_wire.htm

There are several of us experiencing this issue.

The above resource site will show the location of the DC switch gear.

I have replace the 50 A auto reset breaker, yet the problem persists. I am now going to replace the relay on the DC disconnect to see if a better relay will perform more reliably.

WGO tech support is helping me through the issue. local dealer is having a hard time recreating the issue, but is helpful.

[Zia]

Cant find it....any other location?

[thefitrv]

G or K? Not sure it makes a difference, but my location is for a G.

[riplips]

I was told my link was bad:

Wiring Diagrams

[Zia]

Is this what it loks like?

http://rezosystems.com/demos/17338.jpg

Replaced th battery (Bad Cell) and tested with voltage meter, we are getting 14+ volts to the with the engine running to the terminals, so I assume that means the solenoid is fine.

[thefitrv]

That is it. Interesting that it's not protected. Ours (a '16) is in a box.

[mkguitar]

a box would be nice, but the solenoid on your starter is similarly exposed.

Mike