Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Display Modes
 
Old 07-21-2017, 06:19 AM   #1
Platinum Member
 
Join Date: Nov 2016
Location: COLORADO
Posts: 151
Default Brakes...a few questions for you guys.

So I have been on two trips now where I had to descend at fairly low speeds: once coming down from a ski hill in New Mexico and once going down to the bottom of Palo Duro Canyon (in Texas).

Both times my rotors got hot and the brakes where smoking as a result. I took the rig to a brake shop and they said the brakes were fine and that is just the nature of the beast....riding the brakes and not a lot of air to cool the rotors down and a large heavy vehicle.

I was wondering, have any of you had this issue? Can you upgrade your brake system? What are the options?

I will be spending a lot of time in the mountains, so I want to make sure I have the best set up.

Thanks,
Mark
saenzm is offline   Reply With Quote
Old 07-21-2017, 08:26 AM   #2
BBQ
Platinum Member
 
Join Date: May 2016
Location: East
Posts: 2,483
Default

.

The science behind the brakes is -- to convert kinetic energy to thermal energy.

The disks will get hot... that's normal.

But how hot is normal?

If it is smoking... I don't think that is good

Can you use the engine to assist your downhills?
__________________
BBQ is offline   Reply With Quote
Old 07-21-2017, 01:21 PM   #3
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

I think this is natural. You need to keep your foot OFF the brake. Put the transmission in 1 or 2 and descend slowly.
gklugie is offline   Reply With Quote
Old 07-21-2017, 01:55 PM   #4
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,918
Default

Yep, gear down, and don't ride the brakes. Shorter, harder, braking periods will give the brakes time to cool a bit between applications and reduce heat buildup.

From what I have seen, top quality semi metallic pads can handle getting hot to the point of emitting some hot brake smell without damage, but, IMO, seeing smoke is beyond what I would be comfortable with,
booster is offline   Reply With Quote
Old 07-21-2017, 01:57 PM   #5
Platinum Member
 
eric1514's Avatar
 
Join Date: Mar 2014
Location: ID AZ
Posts: 867
Default

If you went up the hill in second, go down the hill in second.
__________________
2006 Dynamax Isata 250 Touring Sedan

"Il Travato Rosso"
2015 Travato 59g
eric1514 is offline   Reply With Quote
Old 07-21-2017, 07:46 PM   #6
Platinum Member
 
Join Date: Nov 2016
Location: COLORADO
Posts: 151
Default

Thanks for all the responses. Yeah, I have been downshifting to help out, but I was just wondering if anyone else was doing anything I wasn't or had done an upgrades I should be aware of.

Sounds like it's just the nature of the beast.

Thanks,
Mark
saenzm is offline   Reply With Quote
Old 07-21-2017, 07:53 PM   #7
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,918
Default

Quote:
Originally Posted by saenzm View Post
Thanks for all the responses. Yeah, I have been downshifting to help out, but I was just wondering if anyone else was doing anything I wasn't or had done an upgrades I should be aware of.

Sounds like it's just the nature of the beast.

Thanks,
Mark
Without knowing what your van has in it for brake pads and rotors, it is very hard to say if there is an upgrade or not available.

If you have low end ceramic pads or organic ones, there sre certainly better parts out there. If you have high end light truck semi metallic pads, it may be as good as it gets. Very good pads can easily be over $100 per axle.

If there is any question as to what you have quality wise, probably best just to get some really good pads, like the Light Truck semi metallics from Hawk and see how it goes.

Even though it was checked, you should also make sure the brake systems are in good shape. Need to make sure nothing is sticking and keeping the brakes dragging when hot, clean fluid with no moisture in it, etc.
booster is offline   Reply With Quote
Old 07-25-2017, 03:38 AM   #8
Platinum Member
 
Phoebe3's Avatar
 
Join Date: May 2017
Location: California
Posts: 674
Default

Your problem is not the calipers and pads, it's the danger of boiling the brake fluid.

"... when the brake fluid starts to boil, the brake pedal slackens and the braking power drops significantly. When brake fluid boils, vapor locks are produced that can be compressed. Brake pulses are no longer sent to the wheel brakes, the brake pedal goes all the way to the floor and that dreaded moment when nothing happens at all occurs."

Brake fluid | my-cardictionary.com

If you can smell your brakes, take the next turnout and stop, giving them 10 minutes or so to cool. While it is unlikely you will boil the brake fluid, why take the chance?
Phoebe3 is offline   Reply With Quote
Old 07-25-2017, 04:40 AM   #9
BBQ
Platinum Member
 
Join Date: May 2016
Location: East
Posts: 2,483
Default

Quote:
Originally Posted by Phoebe3 View Post
Your problem is not the calipers and pads, it's the danger of boiling the brake fluid.

"... when the brake fluid starts to boil, the brake pedal slackens and the braking power drops significantly. When brake fluid boils, vapor locks are produced that can be compressed. Brake pulses are no longer sent to the wheel brakes, the brake pedal goes all the way to the floor and that dreaded moment when nothing happens at all occurs."

Brake fluid | my-cardictionary.com

If you can smell your brakes, take the next turnout and stop, giving them 10 minutes or so to cool. While it is unlikely you will boil the brake fluid, why take the chance?

+1


__________________
BBQ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:41 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.