Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Display Modes
 
Old 06-11-2017, 02:05 AM   #1
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default Compartment Seal/Weatherstrip source needed please

I just replaced the one piece membrane style hinge on my 2000 RT 190. Upon testing the water tightness (is this a word?) with medium pressure with a water hose, I found some water enters through the side & bottom seals. This product is a "D" shape seal with 2 ribs. Where can I buy this product?
gklugie is offline   Reply With Quote
Old 06-11-2017, 02:15 AM   #2
Platinum Member
 
Join Date: Nov 2014
Location: PHX, AZ
Posts: 2,648
Default

try steele rubber products.

they have an extensive catalog, you just need to determine the profile and the measurements

mike
mkguitar is offline   Reply With Quote
Old 06-11-2017, 09:34 PM   #3
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

I have tried Steele Rubber products and I have tried Trim Lok products. Neither seems to have my exact rubber seal.

A thought just occured .....My rig is an older model, and previous owner(s) may have substituted non-factory seals. Possibly I am currently using incorrect weatherstripping.

Does the seal in the following pictures look like the seal on a 2000 Vintage RT side compartment (for those of you that have a similar model)? .... any of you fellows have a similar rig?
Attached Images
File Type: jpg seal1.JPG (16.9 KB, 9 views)
File Type: jpg seal2.JPG (19.0 KB, 9 views)
File Type: jpg seal3.JPG (25.4 KB, 9 views)
File Type: jpg seal4.JPG (30.7 KB, 9 views)
gklugie is offline   Reply With Quote
Old 06-12-2017, 04:57 PM   #4
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Quote:
Originally Posted by gklugie View Post
A thought just occured .....My rig is an older model, and previous owner(s) may have substituted non-factory seals. Possibly I am currently using incorrect weatherstripping.

Does the seal in the following pictures look like the seal on a 2000 Vintage RT side compartment (for those of you that have a similar model)? .... any of you fellows have a similar rig?
I'll take a look at mine tonight and take some pictures.

Also, my hinged seal looks like it was both steel AND plastic (combined). But the plastic is ripped almost from side to side due to "cycling". I'm confused at what it's supposed to look like. Would you have a picture of the finished installation?
Mat Mobile is offline   Reply With Quote
Old 06-13-2017, 03:37 PM   #5
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

Matt, I am just finishing installation on a new side compartment hinge. I too had some kind of Frankenstein plastic/steel hinge installed with drywall screws no less! Apparently the plastic hinge membrane failed, so a previous owner screwed on a piano hinge over the broken factory plastic setup.

See picture: On the left is a correct new, 1-piece plastic membrane hinge. On the right is a partial old plastic hinge with an aluminum piano hinge fastened over it.
Attached Images
File Type: jpg hinge.JPG (32.1 KB, 5 views)
gklugie is offline   Reply With Quote
Old 06-13-2017, 03:51 PM   #6
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Here's what mine looks like:


Sorry... Once installed, it's not easy to photographe.

Mine seems like it's the correct product but has cracks in the folding part (age, sun, cycles, etc.) plus they seemed to have added some caulking. Let us know if you find caulking that seems from the factory or added.
Mat Mobile is offline   Reply With Quote
Old 06-13-2017, 06:40 PM   #7
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

Looks like yours in installed correctly (perhaps a bit too much silicone on the top part).

But... this is the hinge part.

What I seek are a few good pictures of the rest of the compartment seal.... the foamy rubber on the sides and bottom of the compartment. Can you help?
gklugie is offline   Reply With Quote
Old 06-13-2017, 09:11 PM   #8
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Quote:
Originally Posted by gklugie View Post
What I seek are a few good pictures of the rest of the compartment seal.... the foamy rubber on the sides and bottom of the compartment. Can you help?
Ask (twice) and you shall receive!




So it is a "D" shaped strip. The one on the right (the vertical one) is just "squashed".

Yours looks almost better.
Mat Mobile is offline   Reply With Quote
Old 06-16-2017, 01:04 PM   #9
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

Thanks for the picture Matt. This is the rearmost driver side compartment if I am seeing correctly.

Question... Is your "D" shaped seal shown the same as used on the lower storage compartment on drivers side?

Thanks
gklugie is offline   Reply With Quote
Old 06-17-2017, 04:06 PM   #10
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Yes it is.


Sent from my iPhone using Tapatalk
__________________
Currently building Gandalf (1998 Roadtrek Versatile 200 2WD)
Instagram account: @the_bohemivan
Mat Mobile is offline   Reply With Quote
Old 06-21-2017, 12:45 AM   #11
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default Thanks Matt

Thanks. I finished the new seal.
Attached Images
File Type: jpg seala.JPG (34.8 KB, 9 views)
File Type: jpg sealb.JPG (36.4 KB, 9 views)
File Type: jpg sealc.JPG (35.8 KB, 7 views)
gklugie is offline   Reply With Quote
Old 06-21-2017, 03:25 PM   #12
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Nice job gklugie! Where did you end up buying that weatherstripping? What part #?

Mine, as you might see, is pretty flattened out. A replacement this winter might be a good thing!
Mat Mobile is offline   Reply With Quote
Old 06-21-2017, 06:23 PM   #13
Platinum Member
 
gklugie's Avatar
 
Join Date: Jul 2014
Location: Garland, Texas
Posts: 238
Default

Weatherstrip is manufactured by Trim-Lok.
I bought it on Amazon (part # Trim_Lok X5381 HT ).
$33.

I will add that it was difficult to remove the old strip's gooey adheisive .... lots of "goo-be-gone" solvent! Also I cleaned area perfectly with rubbing alcohol for a perfect surface. Installation was a breeze.
gklugie is offline   Reply With Quote
Old 06-21-2017, 08:01 PM   #14
Platinum Member
 
Mat Mobile's Avatar
 
Join Date: Apr 2017
Location: Quebec
Posts: 206
Default

Quote:
Originally Posted by gklugie View Post
Weatherstrip is manufactured by Trim-Lok.
I bought it on Amazon (part # Trim_Lok X5381 HT ).
$33.

I will add that it was difficult to remove the old strip's gooey adheisive .... lots of "goo-be-gone" solvent! Also I cleaned area perfectly with rubbing alcohol for a perfect surface. Installation was a breeze.
Thanks!

Link: part # Trim_Lok X5381 HT
Mat Mobile is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.