Promaster Travato floor insulation

[mojoman]

I'm installing a side screen on my Promaster build the same one used on the Travato, after dry fitting, I'm guessing the floor of the Travato in not insulated. Does anyone know what is the floor construction of the Travato is?

[tgregg]

I had heard it was 20mm thick which is about 7/8 inch thick, so it doesn't sound like a lot of insulation depending on the thickness of plywood used.

[mojoman]

If its 7/8", then there isn't any insulation. No room after the flooring.

[mlts22]

That is something good to know... at the minimum, to toss a rug or two down.

[mojoman]

Found out they do put insulation down, a couple of mils.

[bobojay]

Where's wincrasher when you need him??

[wincrasher]

Sorry, I don't spend every waking hour on here - I have a business to run after all.

I'll have to measure mine and report back. I'd be surprised is it's any more than a layer of dynamat and then the plywood.

I had once posted a video of the insulation going on the walls, but I forget where it is. It may show what's going on with the floor.

None of these vans is going to have much on the floor. Some may spray the underside of the van. Winnebago doesn't.