Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Display Modes
 
Old 03-02-2017, 10:48 PM   #1
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default DIY westy top for Chev E3500

Thought I would post a few pictures of my "westy-type" pop-top project. Bought the van last fall and started looking around for a lid. Looked at all the choices and didn't like what I saw for appearance or price. in my typical fashion, I decided i could build one myself to get exactly what I wanted. To wit: a Westphalia top built to fit a full size American van. I'm pretty close to prototype now after 3 months of off and mostly on work. Waiting for the weather here in Idaho to warm a bit before I tackle the fiberglass mold making. I'll post more pics as the project progresses or as requested by those interested.
Attached Images
File Type: jpg 1.jpg (193.7 KB, 17 views)
File Type: jpg Plug down and on the bench..jpg (139.8 KB, 19 views)
File Type: jpg high-tech fairing separation.jpg (107.8 KB, 15 views)
File Type: jpg polyester primer filler sprayed on.jpg (144.9 KB, 16 views)
unimat is offline   Reply With Quote
Old 03-02-2017, 11:43 PM   #2
Platinum Member
 
peppster66's Avatar
 
Join Date: Aug 2014
Location: Brampton,Ontario
Posts: 244
Default

That is very cool, I think its great when I see someone build something from scratch, from an idea, or a thought, keep up with it, and please show more pics as you proceed, thanks,,,,,,
peppster66 is offline   Reply With Quote
Old 03-02-2017, 11:51 PM   #3
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,913
Default

Are you doing this type of style--or rear up?


booster is offline   Reply With Quote
Old 03-03-2017, 03:33 AM   #4
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default

Front up like that one but with a fixed fairing over the cab.
unimat is offline   Reply With Quote
Old 03-03-2017, 04:32 PM   #5
Bronze Member
 
Join Date: Jul 2016
Location: in
Posts: 40
Default

How are you going to attach it?
PinIN is offline   Reply With Quote
Old 03-03-2017, 05:06 PM   #6
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default

The fairing will get insulated, epoxied and screwed to the cab. The lid will be "scissor" hinged at the rear and clamped down at the front where it mates with the fairing.
unimat is offline   Reply With Quote
Old 03-03-2017, 07:25 PM   #7
Bronze Member
 
Join Date: Jul 2016
Location: in
Posts: 40
Default

I assume you will leave the roof structure intact above the front seats and remove the remaining ribs behind the front seats? Do you think you will need to have a reinforcing ring around the hole?
PinIN is offline   Reply With Quote
Old 03-04-2017, 05:08 PM   #8
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default

Precisely. And yes, I envision a frame made of angle iron, protruding above the roof line to provide both a water dam and attachment point for the tent bottom.
unimat is offline   Reply With Quote
Old 05-25-2017, 04:27 AM   #9
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default Progress on my custom top

It was a long cold winter in Idaho but i got a lot done on my chevy 3500 build. here's afew more pics of the work and ( almost) finished top. next up: install gas springs and tent.
Attached Images
File Type: jpg 35) fairing mold polished, waxed and masked..jpg (141.4 KB, 13 views)
File Type: jpg 38) finished fairing.jpg (166.3 KB, 12 views)
File Type: jpg 41) turning lid mold over.jpg (184.9 KB, 10 views)
File Type: jpg 49) top in closed position.jpg (114.1 KB, 10 views)
unimat is offline   Reply With Quote
Old 05-25-2017, 12:05 PM   #10
Platinum Member
 
Join Date: Nov 2006
Location: Virginia
Posts: 764
Default

Wow, congrats on your talent and ability to bring it out in your rig. I will be interesting to watch your progressive. Ron
__________________
Ron J. Moore
'15 RT210P
Ron J. Moore is offline   Reply With Quote
Old 05-25-2017, 03:14 PM   #11
Bronze Member
 
Join Date: Jul 2016
Location: in
Posts: 40
Default

Looks good, I assume you have worked with fiberglass before. I think those tops run about 5-7k installed.
PinIN is offline   Reply With Quote
Old 05-25-2017, 07:19 PM   #12
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default

Actually no. This was my first effort. HUUUUGE learning curve.Kept me out of the bars all winter though....
unimat is offline   Reply With Quote
Old 05-26-2017, 03:05 PM   #13
Bronze Member
 
Join Date: Jul 2016
Location: in
Posts: 40
Default

That's encouraging to DIY'ers.
Must have been a pain to make it symmetrical and get it even looking.

How thick or how many layers, uniform thickness or did you make it thinner or thicker in some areas?

Does it flex or is it pretty stout?
PinIN is offline   Reply With Quote
Old 05-26-2017, 03:06 PM   #14
Platinum Member
 
Join Date: Feb 2015
Posts: 116
Default

Unimat, That is impressive. I could never do that.
Viperml is offline   Reply With Quote
Old 05-26-2017, 03:54 PM   #15
New Member
 
Join Date: Mar 2017
Location: ID - Idaho
Posts: 11
Send a message via Yahoo to unimat
Default

Quote:
Originally Posted by PinIN View Post
That's encouraging to DIY'ers.
Must have been a pain to make it symmetrical and get it even looking.

How thick or how many layers, uniform thickness or did you make it thinner or thicker in some areas?

Does it flex or is it pretty stout?
Yes, and it's not perfect, just looks that way.
The fairing is gelcoat plus a total of 4 3/4 ounces of glass and then filled with polystyrene insulation. very rigid. The lid was the same, but with the addition of 1" of polystyrene board epoxied to the inside, along with 1" of wood frame for mechanical and tent attachment, and then epoxy resin and 10 oz. boat cloth to finish the inside. You can stand on it. I recall I added an additional 2 oz. of cloth all around the perimeter to tie it together ( I have seen the Westy tops crack at the corners) and to thicken the edge for gasket attachment. Whole lid weighs 135# I was aiming for 100#
unimat is offline   Reply With Quote
Old 05-28-2017, 11:43 AM   #16
Platinum Member
 
markopolo's Avatar
 
Join Date: Oct 2006
Location: New Brunswick, Canada
Posts: 8,828
Default

The styling, design and construction is really impressive The DIY stuff we get to see here is amazing.
markopolo is offline   Reply With Quote
Reply

Tags
chevy express 3500, custom fiberglass, pop-tops, sportsmobile tops, v-tops

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 10:36 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.