Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Display Modes
 
Old 02-23-2019, 12:56 PM   #1
Bronze Member
 
Join Date: Aug 2018
Location: MI
Posts: 23
Default 2018 Chevrolet Express Roadtrek Wheels & Tires LIKE NEW TAKE OFFs

Selling my LIKE NEW take off aluminum wheels, tires, TPMS and spare. I converted to a dually rear axle so do not need. Only 2,400 miles on tires and wheels. LT245/75R/16 Bridgestone V-Steel Rib 265. E Load Rating . Excellent condition. Roadtrek wheels 16x7.5" approx 3.5" back spacing load rating 3250 LB. 8 lug on 165.1 mm bolt pattern, 131 mm center bore. These will fit any 8 lug Chevy Express & GMC Savana 2500 or 3500. $1,800

4) Aluminum Wheels with center caps, tires and TPMS (sensors) 2,400 miles
1) Steel GM spare with tire zero miles.

Pickup in SE Michigan or can ship freight (extra cost).
Attached Images
File Type: jpg IMG_7574.jpg (305.3 KB, 24 views)
File Type: jpg IMG_7575.jpg (310.2 KB, 13 views)
File Type: jpg IMG_7579.jpg (274.2 KB, 15 views)
File Type: jpg IMG_7576.jpg (233.1 KB, 14 views)
File Type: jpg IMG_7578.jpg (227.5 KB, 13 views)
valvegod is offline   Reply With Quote
Old 02-23-2019, 01:52 PM   #2
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,913
Default

If you get a chance, would you be able to take a look at them and see what the offset is? Most aluminum wheels would have it marked on the back side of them, but may need to be measured.


We haven't had much information on the newer versions of the Chevy Roadtrek aluminum wheels, so it would be very interesting.
booster is offline   Reply With Quote
Old 02-23-2019, 04:35 PM   #3
Bronze Member
 
Join Date: Aug 2018
Location: MI
Posts: 23
Default

with tires on and not being able to measure the thickness of the bead, they appear to be 16x7.5" (maybe 16x7") with approx 3.5" back spacing.
valvegod is offline   Reply With Quote
Old 02-23-2019, 06:06 PM   #4
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,913
Default

Quote:
Originally Posted by valvegod View Post
with tires on and not being able to measure the thickness of the bead, they appear to be 16x7.5" (maybe 16x7") with approx 3.5" back spacing.
Thanks, valvegod, that would indicate a zero offset or slightly minus, which typical for aftermarket wheels, like older AR were also, and quite wrong for the Express vans, IMO, which are stock at +28mm offset.

You should be able to measure the offset directly by laying it on by putting a board across the tire side wall and measure to the wheel mounting surface from the inside and outside of the tire. I am surprised the wheels aren't marked with size and load capacity, as that is pretty important on aluminum wheels, especially cast ones.
booster is offline   Reply With Quote
Old 02-23-2019, 06:25 PM   #5
Bronze Member
 
Join Date: Aug 2018
Location: MI
Posts: 23
Default

they normally measure from the inside of the bead for wheel width, offset and back spacing but beads are buried in the tire wall so cannot be specific. The load capacity on the wheels are 3250 lbs. just no size listed. only part numbers, casting numbers etc.
valvegod is offline   Reply With Quote
Old 02-23-2019, 06:55 PM   #6
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,913
Default

Quote:
Originally Posted by valvegod View Post
they normally measure from the inside of the bead for wheel width, offset and back spacing but beads are buried in the tire wall so cannot be specific. The load capacity on the wheels are 3250 lbs. just no size listed. only part numbers, casting numbers etc.

That is the normal way to measure a wheel, but with tires on you can't ever do that accurately. The tires locate off the inside of the wheel bead, and the tires should be symmetrical, so you can take the outside of the sidewall to wheel locating surface and subtract them/2 for offset, but it doesn't work for wheel width or backspace.
booster is offline   Reply With Quote
Old 06-07-2019, 01:04 AM   #7
New Member
 
Join Date: Mar 2019
Location: cypress, ca
Posts: 1
Default

Do you still have the wheels for sale?
Eisen is offline   Reply With Quote
Old 03-13-2020, 11:45 PM   #8
Bronze Member
 
Join Date: Aug 2019
Location: Minnesota
Posts: 24
Default

Quote:
Originally Posted by valvegod View Post
Selling my LIKE NEW take off aluminum wheels, tires, TPMS and spare. I converted to a dually rear axle so do not need.
Was it difficult to convert to duallies? Was it expensive? I'd like to do that, but I'm not sure what I'm getting into.
Morry is offline   Reply With Quote
Old 03-13-2020, 11:56 PM   #9
Platinum Member
 
Join Date: Aug 2010
Location: Minnesota
Posts: 11,913
Default

There was a thread on the upgrade here:


https://www.classbforum.com/forums/f...sion-8638.html
booster is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 01:01 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.