Is that the driver's seat to the right? If so, the area of the wire splice would be to the left of the cabinet. I would check everywhere else before going into the wall, as it was not easy to get into.
Thank you for your reply. It's effectively the driver's seat on the right. I do agree that removing the wall of the kitchen must not be a small task. I'm gonna check if I could possibly try to run a wire from the rear parking light to the back clearance lights harness??
Hi again. I was able to make my clearance lights (front and rear) work again. What I did - I run a wire from the left rear parking light (did a soldered split on existing brown wire) and run it behind the left vertical wall, then hidden it as much as I could, following the path that I drew in red on the picture. Once behind the heat pump cover, I found a ~ 1/4 inch gap where I could run the wire to get access to the clearance lights harness (under the top cover of the heat pump). Another soldered split with the existing red wire and everything is working once again!
