Diff bwtween front/rear captains seats?

[MattGinOK]

is there a difference between the front and non-front captains chairs. Naturally it's a 1986 class B dodge falcon 190. I don't think there is, but i'm not so sure.

thanks
MattGinOK

 

[Johnny R]

1. Front seats recline, the 2nd row seats do not.
2. Front seats swivel, 2nd row seats do not.
3. Fold down for bed is different.

 

[MattGinOK]

Thanks. Just needed to know as I'm looking for captain seat replacements.

 

[JerrMan]

I have an 1988 Dodge
I took the rear seat swapped the front pedestal. And yes its perfect now. I did remove the left arm as it interfered with the door.
I had removed the rear seat in front of the door as we don't need it.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[JerrMan]

I have an 1988 Dodge
I took the rear seat swapped the front pedestal. And yes its perfect now. I did remove the left arm as it interfered with the door.
I had removed the rear seat in front of the door as we don't need it.

Sent from my SAMSUNG-SM-G890A using Tapatalk

I guess i should mention our van is an Xplorer xtra van 222
And it has 4 reclinable, swivable seats.
Only difference was the extra arm rest on the rear seat, which i removed.
Apparently the drivers seat track was wore out , as it rocked badly.


Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[MattGinOK]

Excellent! That is what I found out. While the drivers left arm was tight, it looks to be ok. I cleaned the tracks and they are all sliding as nature intended. All is well in rv land.

thanks for replies.

 

[JerrMan]

Excellent! That is what I found out. While the drivers left arm was tight, it looks to be ok. I cleaned the tracks and they are all sliding as nature intended. All is well in rv land.

thanks for replies.

I had a hard time closing the drivers door, and i swivel the chair . So with the arm on it theres no possibility od that. Plus my seat would not slide back and forth. My wife moves it most all the way forward, me most all the way back.
So thst was a problem.
But its is super solid.
Glad it worked for you.