Isotherm 85 front panel change.

[GeorgeRad]

My wife suggested changing the fridge front panel from the old-style pattern laminate to a more calmer uniform finish one. I picked brushed anodized aluminum surface so here it is. The panel is 1/8” thick and it is much flatter than the previous very thin laminate. The fridge is the Isotherm Cruise 85 and the panels size is 17 7/8 in X 23 1/4 in.

 

[Johnnyfry]

Looks very nice. Most fridges have the option of exchanging the front trim panel. It makes for a nice upgrade.

 

[GeorgeRad]

Unfortunately, this common option wasn’t available for my fridge, used to be but not anymore. I checked with Isotherm service folks, so I was on my own. My current panel is 1/8” thick and stays very flat. I used this material. https://www.nudo.com/p_polymetal.php