Reply
 
Thread Tools Display Modes
 
Old 08-21-2007, 12:32 AM   #1
Platinum Member
 
markopolo's Avatar
 
Join Date: Oct 2006
Location: New Brunswick, Canada
Posts: 7,801
Default Support TV or Monitor

The previous owner of my B+ added a bracket to support a TV or a monitor. He chose a good spot for visibility:



Even though it was bolted and had a backing plate it still flexed the particle board panel.

I made an Oak support that stopped the flexing:







The weight is now transmitted to the floor. The mount is bolted to the Oak then bolted through the particle board panel. Additionally, it is screwed into the underside of the over cab cabinets.

The Oak board covered the holes made by the previous installation and let me raise the position of the mount up probably 8 inches or so.
__________________
Two bikes on sliding cargo box: https://www.classbforum.com/forums/m...icture206.html & 1997 GMC Savana 6.5L Turbo Diesel Custom Camper Van Specifications: https://www.classbforum.com/forums/f...vana-5864.html
markopolo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.